REA Website REA Store

Public Release

Major VersionM

by REA

2. Top Hull Preparation

Written By: REA
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

00:20:00 - 00:40:00

Sections

1

Flags

0

  1. Download and print the top hull template PDF. Tape it to the PVC Half and drill the 4 holes marked on the template.

    • Download and print the top hull template PDF.

    • Tape it to the PVC Half and drill the 4 holes marked on the template.

  2. Grab your conning tower and we need to glue it to the top hull

    • Grab your conning tower and we need to glue it to the top hull

    • There is no set position for it so feel free to place it where ever you like.

    • We found that araldite worked best to glue the 3D printed conning tower to the PVC top hull.

    • Once it has glued drill a number of holes or slots in the pvc top hull under the conning tower to allow you to feed the satellite receiver cable through and allow water in and out of the conning tower.

    • You will need to drill some holes into the hull to allow the water to enter and exit the submarine as it dives and resurfaces.

Finish Line

Author

REA

Member since: 07/20/2020

7,051 Reputation

41 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 5

All Time: 151