Introduction
Supplied Components:
| Qty | Name |
|---|---|
| 1 | Hitec HS-646WP Servo |
| 17 | M3 Brass threaded insert |
| 17 | M3x8mm Stainless Socket Head Cap Screw |
| 2 | M3x6mm Stainless Grub Screw |
| 1 | 4mm Brass Rod |
| 1 | 24T C1 Spline Gear |
| 1 | 4mm Bore 32 Pitch, 16T Shaft Mount Pinion Gear |
This guide outlines the parts that come in the kit that are required for the Fore Cap Assembly. Find these parts and put them aside ready for the assembly guides for the Fore Cap.
-
-
1 x Hitec HS646WP servos are required for the Fore Cap Assembly
-
-
-
17 x M3 Threaded insert are required for the Fore Cap Assembly
-
-
-
17 x M3 Stainless Socket Head Cap Screws are required for the Fore Cap Assembly
-
-
-
2 x M3 x 6mm set screws required for the roe cap assembly
-
-
-
1 x 4mm Brass rod's are required for the Fore Cap Assembly
-
-
-
1 x 24T C1 Spline Gear is required for the Fore Cap Assembly.
-
-
-
1 x 4mm Bore 16T Shaft Mount Pinion Gear is required for the Fore Cap Assembly.
-
Almost done!
Finish Line
