REA Website REA Store

v1.2

Minor Versionm

by REA

7 - Tether Line Slot

Written By: REA
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

3

Time Required

00:03:00 - 00:05:00

Sections

1

Flags

0

Video Overview

  1. Create a New Sketch on the rear face of the car. Place a 3mm (width) x 6mm (high) rectangle on the rear face, starting from the bottom left corner.

    • Create a New Sketch on the rear face of the car.

    • Place a 3mm (width) x 6mm (high) rectangle on the rear face, starting from the bottom left corner.

  2. Extrude cut the rectangle to a distance of -210mm (All of the way through the car).

    • Extrude cut the rectangle to a distance of -210mm (All of the way through the car).

  3. Congratulations, you have completed this section.

    • Congratulations, you have completed this section.

Finish Line

Author

REA

Member since: 02/16/2021

5,965 Reputation

45 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 41

All Time: 525