Introduction
Supplied Components:
| Qty | Name |
|---|---|
| 1 | Blue Robotics T200 Thruster |
| 2 | Hitec HS-646WP Servo |
| 20 | M3 Brass threaded insert |
| 20 | M3x8mm Stainless Socket Head Cap Screw |
| 2 | 4mm Stainless Steel Rod |
| 2 | 24 Tooth (4mm Bore) Bevel Gear |
| 2 | 24 Tooth (6mm Bore) Bevel Gear |
This guide outlines the parts that come in the kit that are required for the Aft Cap Assembly. Find these parts and put them aside ready for the assembly guides for the Aft Cap.
-
-
Find the T200 Thruster in the kit
-
-
-
2 x Hitec HS646WP servos are required for the Aft Cap Assembly
-
-
-
20 x M3 Stainless Socket Head Cap Screws are required for the Aft Cap Assembly
-
-
-
20 x M3 Threaded insert are required for the Aft Cap Assembly
-
-
-
2 x 4mm Stainless Steel rod's are required for the Aft Cap Assembly
-
-
-
2 x 4mm Bore Bevel Gear are required for the Aft Cap Assembly
-
-
-
2 x 6mm Bore Bevel Gear are required for the Aft Cap Assembly
-
Almost done!
Finish Line
